Self-adhesive weather stripping installation tips

Maybe you need a can of PU foam sealant on such a cold day.
December 22, 2018
weather pile strip seal,sliding window seal strip
January 5, 2019

The weather strips are used for building door and window components, elastic strips or rods on the joints of glass and beading, glass and frame fans, frames and fans, and fans and fans. So what are the techniques for installation? The installation of doors and windows Self-adhesive weather stripping is also related to many aspects of our door and window applications, so we must have some installation skills when installing. Let’s let the stable Xiaobian share the installation skills of the Self-adhesive weather stripping of the doors and windows. I hope that you can improve your installation skills.

1. If it is necessary to carefully remove the debris in the slot before installing the glass, such as mortar, brick scraps, wooden blocks, etc., the glass should be carefully centered when placed, ensuring uniform clearance on both sides, and correcting and fixing in time to prevent collision Bit, offset from the center of the slot.

2, the door and window Self-adhesive weather stripping can not be pulled too tight, the length of the blanking is 20-30mm longer than the assembly length. It should be set in place during installation, the surface is straight, and it is in close contact with the glass and glass slot, so that the surrounding force of the glass is evenly distributed. Self-adhesive weather stripping should be beveled at the corners and glued firmly at the break.

3. When sealing the glass with sealant, first use the door and window tops or rubber blocks to squeeze the glass, leaving the gap of injection, the depth of injection should be no less than 5mm, and the glass should be kept free from vibration before the glue is cured.

Leave a Reply

Your email address will not be published. Required fields are marked *